The Shredder 20 Girls has all the same features as the Shredder 20 but with a slightly different frame. The geometry is the same but the girl's version has a slightly lower top tube stand over which makes it easier to straddle. - 6061 alloy Shredder lo-profile frame - Haro alloy top load stem - 1-1/8 threadless headset - Sure stop coaster brake and linear pull v-brake with adjustable lever - 36-spoke wheels with 20" alloy rims - Full matching pad set

The Shredder Pro 20 adopts Hi-ten steel frame construction with slightly more aggressive freestyle geometry than that found on the Shredder 20. 25/9 gearing, a cassette rear hub with 14mm axle and alloy 990 style brakes all contribute to giving the Shredder Pro 20 more freestyle characteristics. - Hi-ten frame with 20.3" top tube - 1 1/8" hi-ten threadless fork - 7.5" hi-ten bars with Haro alloy top load stem - 25/9 gearing with sealed bearing 9T driver - Haro padded fully adjustable seat - Kenda Kontact tires 20 x 2.25" front and rear - Alloy 990 brake

The Shredder Pro 20 adopts Hi-ten steel frame construction with slightly more aggressive freestyle geometry than that found on the Shredder 20. 25/9 gearing, a cassette rear hub with 14mm axle and alloy 990 style brakes all contribute to giving the Shredder Pro 20 more freestyle characteristics. - 6061 alloy Shredder low-profile frame - Haro alloy top load stem - 1-1/8 threadless headset - Sure stop coaster brake and linear pull with adjustable lever - 36-spoke wheels with 20" alloy rims - Also available in a step thru model for girls - Full pad set

Based from all the same spec and features as the Shredder Pro 20, the DLX kicks it up a few notches by adding four pegs, front brakes and a gyro making this platform more adaptable to a wider range of riding disciplines. - Hi-ten frame with 20.3" top tube - 1 1/8" hi-ten threadless fork - 7.5" hi-ten bars with Haro alloy top load stem - 25/9 gearing with sealed bearing 9T driver - Haro padded fully adjustable seat - Kenda Kontact tires 20x2.25" front/rear - Alloy 990 brake - Four pegs, front 990 brakes and Gyro

Whether you fit the "rad like dad" category looking for something to ride with your kids or perhaps you're just a really big kid who needs a larger size bike, the Shredder Pro 24 is a versatile model which can accommodate a wide variety of riders. Hi-ten steel frame construction along with 24-inch alloy rim wheels and 990 style alloy brakes make this model every bit capable of doing some shredding. - Hi-ten frame with 21" top tube - 1-1/8" hi-ten threadless fork - 7" hi-ten bars with Haro alloy top load stem - 39/16t gearing - Haro padded fully adjustable seat - Kenda K-Rad 24 x 1.95" tires - Alloy 990 brake

The Everyday is the perfect bike to thrash on. It comes equipped with tapered fork legs, 3-piece cranks, mid-bottom bracket, and extra-wide 2.3" tires. Whether riding the trails, street, or park, this bike is ready to get rad. Every day. Key Features - Everyday frame design with mid-bottom bracket, integrated seat clamp and micro dropouts - SE tapered-leg forks with cut-out clearance for pegs - SE 3-piece tubular cranks with 25-9 micro gearing and SE sprocket - Alloy hubs - Lightweight seat/post combo - Top-load stem with hidden top cap for a clean look - Extra-wide 2.3" tires provide more traction and forgiveness on harsh landings - 25.6 pounds

The Utopia Hybrid frame differs from the Utopia frame being drilled for gyro tabs, pivot-3 removable brake mounts, 14mm slot dropouts, and the option for 20.5" toptube. - Tubing: butted and seamless Japanese 4130 chromoly - Technical street/flatland/park frame, shorter top tube and lower seat tube for younger riders - Hydroformed top and down tube for superior strength and stiffness - Wider rear triangle allows clearance for a 2.3" tire - Lifetime guarantee - 4.45lbs for 20" TT frame

Chase Hawk signature frame made from 100% cult classic tubing for increased strength. Cult top tube gusset, integrated headtube and externally machined mid BB shell. Vintage style tapered seatstays with removable brake mounts and s-bend chainstays with room for 2.4" tires. - Made from 100% Cult Classic tubing for increased strenght - Investment Cast heat-treated dropouts - Integrated headtube and externally machined mid BB shell - Cult top tube gusset

BMX-tough and street-smart, Haro's Downtown 26 helps keep you young, even if you’re not hucking stair gaps everyday. It’s got cruiser-class geometry and a tough steel frame with internal head tube, Mid BB shell, welded seat clamp, and 22-inch top tube. If you’re airborne-prone, you'll appreciate the aerial extras, such as the stout, 3-piece chromoly cranks and fat Kenda Kranium rubber for sweet landings. At the track or the park, the 36-spoke aluminum wheels and loose ball hubs roll strong, while a pair of plastic pedals keep the weight down and your shins intact.

Tested on the track and designed in conjunction with a team with BMX race knowledge spanning 3 decades, Radio Raceline Helium frames are well thought out and powerful pure bred race machines. You'll find no gimmicks, no "goofy" tubing shapes or unnecessary features. These frames have been built from the ground up with race proven geometry and technology combined with clean, functional aesthetics designed to give you the holeshot out of the gate. Radio Raceline Helium frames are designed to feel comfortable, stiff and fast, exactly how a race bike should.

Sam Jones signature Jonesin' frame is the latest BSD frame. Designed for front end tricks with a steep 76 degree headtube angle, 8.9" standover height, and uses the new Supercoop chainstays for extra tire clearance. - Sanko Japanese seamless 4130 cromo tubing, triple butted - Supercoop chainstays–extra wide rear end - Brakeless frame - 7mm thick investment cast heat treated 4130 cromo dropouts with built-in chain tensioners - Investment cast seatstay bridge - Built in seat clamp - Weight: 5 lbs

2 Short BMX Frame - Integrated headtube - 5mm thick heat-treated dropouts - Tapered seatstays

The Sunday Darkwave frame is built out of 100% 4310 chromoly and features Sunday's signature dent-resistant wave down tube to give riders a little extra peace of mind when things don't go according to plan. It stays looking clean with refined details like an integrated seat clamp, tapered stays, and integrated chain tensioners. Removable brake hardware and gyro tabs are also available when you need them and disappear when you don't. - 100% 4130 chromoly frame - Broc Raiford signature geometry - Removable U-brake hardware and Gyro tabs - Integrated seat clamp - Wave Down Tube: Down tube dents are common with the competitor's frames and they significantly weaken the front end of your bike. The double-butted, 1.45" diameter down-tube feature Sunday's proven Wave shaping to fight denting against contact made from a rail, ledge, coping and whatever else happens to get thrown at it. - Miter Cut Top Tube: A miter-cut top tube creates a precise joint with the seat stays during welding. This increases the strength substantially over frames that use a “sandwiched” top tube at this critical junction. - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. They are both angled on the inside for improved chain clearance and weight savings. - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in position and to simplify wheel removal.

Introducing Gary Young's signature Wavelength frame. With a longer rear end and top-tube options, this frame is designed for riders who love to go fast and want a more stable ride for trails and transitions. - 100% 4130 chromoly frame - Removable U-brake hardware and Gyro tabs - Wave Down Tube: Down tube dents are common with the competitor's frames and they significantly weaken the front end of your bike. The double-butted, 1.45" diameter down-tube feature Sunday's proven Wave shaping to fight denting against contact made from a rail, ledge, coping and whatever else happens to get thrown at it - Miter Cut Top Tube: A miter-cut top tube creates a precise joint with the seat stays during welding. This increases the strength substantially over frames that use a “sandwiched” top tube at this critical junction. - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. They are both angled on the inside for improved chain clearance and weight savings - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in position and to simplify wheel removal

The Revo line allows you to get your first taste of the BMX world on a solid and well-designed bike. We took extra care when hand-selecting the components on these bikes to ensure that they could be ridden straight out of the box and are simple to work on and maintain, but also easily upgradeable over time. Despite the low price-point, the Revo is packed full of great features like 25-9 gearing, tapered fork legs, and short/responsive pro-inspired geometry. Building on the Revo 20", the Revo 20" Pro adds a 3pc crank upgrade, making this machine even more dialed than ever before.

Designed specifically for technical park, transition and street riding, the new frame design has short chain stays with a steep head tube angle, a tall bottom bracket, hollow dropouts with integrated chain tensioners and a significantly lower standover. Includes all of the necessary (and fully removable) braking and Gyro tab. The front triangle makes use of traditional round Nightshift-style top and down tubes with internal gusseting for added strength. - 100% 4130 Chromoly Frame - Nightshift style, double-butted, top and down tubes - Integrated seat clamp - Hollow 8mm wide dropouts - Removable, brake mounts and cable guides/stops - Small internal chain tensioner to hold the wheel in position and to simplify wheel removal

Jake Seeley's signature frame is designed to complement his progressive, technical street riding. The Street Sweeper evolves directly from Jake Seeley's original Broadcaster frame by using shorter chain stays, a steeper head tube angle, a taller bottom bracket and smaller hollow dropouts with integrated chain tensioners. Built with versatility in mind, the Street Sweeper features removable u-brake hardware and Gyro tabs. The frame's front triangle makes use of traditional round Nightshift style top and down tubes with proven internal gusseting. - 100% 4130 Chromoly Frame - Nightshift style, double-butted, top and down tubes with proven internal gusseting - Integrated seat clamp - Butted Seat Tube & Miter Cut Top Tube: The seat tube is where all three triangles of the frame meet and it is crucial to keep this tube strong - Tapered Chain & Seat Stays: Both chain and seat stays taper to provide a refined and clean look to the frame while still providing strength. The are both angled on the inside for improved chain clearance and weight savings - Hollow Dropouts with Chain Tensioners: Hollow 8mm wide dropouts are as light as a solid 5mm dropout, but over twice as strong. There is a small internal chain tensioner to hold the wheel in place as well as simplify wheel removal - Removable Brake Hardware: Refined removable brake mounts and cable channel improvements that provides benefits with or without a brake setup

The ALVX AF+ is the latest version of Alex Donnachie’s signature ALVX frame. Featuring the same super tech geometry and ultra short rear end, but now with an updated invest cast chainstay yoke which maintains the tire clearance as well as creating a more rigid rear triangle and it also looks pretty sick. - Invest cast chainstay yoke which creates more clearance for the tire for when your wheel is slammed, because this part is cast and heat treated it strengthens the rear end of the frame by stiffening it up - 7mm thick invest cast dropouts to provide good support for your axle, and the small shape has been designed for grinding meaning there's no overhang to catch on ledges or rails,. The dropout is heat treated before welding making it extra tough with integrated chain tensioner bolts inside - Brake mounts: none - External gussets for strength - Sanko Japanese seamless 4130 chromoly

BSD Freedom is Kriss Kyle's signature frame, designed to perform well on all terrain. This frame combines the stability of a low 11.5" BB, the responsiveness of a 75 degree head angle and the versatility of a short rear end. To create a stiffer rear triangle we've utilized an invest cast wishbone and invest cast seatstay bridge. - Constructed from Japanese Sanko seamless 4130 chromoly tubing, triple butted - Removable brake mounts, brake kit sold separately - Head tube and bottom bracket heat treated and CNC machined 4130 - Heat treated and investment cast 4130: chainstay wishbone, dropouts, and seatclamp - Frame weight: 5 lbs

The Grime frame is the signature frame of Denim Cox. Whether he's riding motocross, Barbie bikes or BMX, you know Denim tears it up on all terrain. Designed to Denim’s specification, with a steep 75.5 headangle, a 12.8 - 13.2” rear end length with an invest cast chainstay yoke for extra tire clearance and a 9” standover.

Downtown 24 has been built for the taller rider or Dad that still cruises around with his family. Our new model comes well equipped to take you anywhere you wish to ride. Fully Sealed internal headset and Mid BB, just like the Pro's ride, you will be amazed what you can do on the Downtown. Also added features are the Haro custom molded recycled pedals and new Haro 1978 Lever. - Hi-ten 24" freestyle frame with integrated head tube, Mid BB shell, integrated seat clamp and 21.6" top tube - Full hi-ten fork with tapered legs - Hi-ten 7" bars with Haro 1978 alloy top load stem - Haro 1978 3-piece chromoly 8-spline 175mm cranks with sealed Mid BB - 25/10 gearing with sealed bearing 10T driver - Kenda Kranium tires 24x2.1" front/rear - Haro padded fully adjustable seat - Haro Team grips

Downtown 26 has been built for the taller rider or Dad that still cruises with his family. Haro's new model comes well equipped to take you anywhere you wish to ride. Fully Sealed internal headset and Mid BB, just like the pros ride, you will be amazed what you can do on the Downtown. Also added features are the Haro custom molded recycle pedals and new Haro 1978 Lever. - Hi-ten 26" freestyle frame with integrated head tube, Mid BB shell, welded seat clamp and 22" top tube - Full hi-ten fork with tapered legs - Hi-ten 7" bars with Haro 1978 alloy top load stem - Haro 1978 3-piece chromoly 8-spline 175mm cranks with sealed Mid BB - 25/10 gearing with sealed bearing 10T driver - Kenda Kranium tires 26 x 2.1" front and rear - Haro padded fully adjustable seat - Haro Team grips

The Casino series is one of the top selling completes available today. Designed to ride like a Pro's bike on an amateur's budget. We make this bike in Taiwan to keep the quality high and selected a bunch of after-market Fiction parts so it will last.

The Casino XL has a little more cockpit space for taller or more experienced riders. The Casino series is one of the top selling completes available today. Designed to ride like a Pro's bike on an amateur's budget. We make this bike in Taiwan to keep the quality high and selected a bunch of after-market Fiction parts so it will last.

Formerly called the Casino XS, the Compact is meant for smaller riders who want the upgradeability of a 20" but the riding size of an 18" bike. Designed to ride like a Pro bike on an Am budget. We make this bike in Taiwan to keep the quality high. For 2020 we upgraded to the after-market Fiction Atlas tires.

If you're looking for the perfect "in-between" size for the rider a few years away from a full size 20" BMX bike, our Dice 18" is the unquestionable choice. Using a much lighter weight 6061-T6 alloy frame and a cassette hub with 25-9 gearing, the Dice is a bike that any rider would be stoked to be on board.

We've upgraded the frame on the Dice 20" with a full alloy 6061-T6 frame, making it one of the very first full alloy freestyle bikes ever made. Everything on this bike was picked to ensure that this bike has the right equipment to make those first steps in BMX as enjoyable as possible. The Dice has specific geometry making it perfectly suited for the younger rider. The frame uses a shorter 20" toptube paired with a shorter 13.2" chainstay. Featuring 25-9 gearing and tapered forks, the Dice is one entry-level machine that packs a serious punch for a lightweight contender.

The Stereo is built to handle abuse. Equipped with all sealed bearings (-pedals) and a ton of aftermarket Fiction parts. The geometry and big bars make this a great complete for more advanced riders.

All new for 2019 is Haro's Mike King Signature series, The Haro Group 1 RS2 24. The frame has been constructed by using 6061 aluminum with sealed mid BB and internal threaded fork. Cr-Mo 4130 fork and bar, with Haro's own 3-piece 8 spline tubular cranks. 36 spoke double wall rims with sealed cartridge bearing hi-flange hubs. Finished off with a lineage pivotal seat and pivotal post. - 100% 6061 alloy frame construction with integrated head tube, MID BB shell and 7mm Group 1 dropouts 22"TT - 100% chromoly fork with internal threaded steer tube, tapered legs and 5mm dropouts - 100% chromoly Freestyler cruiser bars 7" with Haro 1978 top load stem - Haro1978 3-piece chromoly 8-spline 175mm cranks with Haro steel sprocket and sealed Mid BB - 36 spoke wheels with alloy shell high ange sealed bearing hubs and double-wall alloy rims - Fully sealed wheels with Lineage high ange hubs and double-wall alloy rims with satin nish - Kenda Kranium skinwall tires front and rear - Haro Lineage padded Pivotal seat with alloy Pivotal post - Haro "1978" plastic pedals - Haro Team grips - Pro-Max alloy V-brake and lever

The Everyday is the perfect bike to thrash on. It comes equipped with tapered fork legs, 3-piece cranks, mid-bottom bracket, and extra-wide 2.3" tires. Whether riding the trails, street, or park, this bike is ready to get rad. Every day. - Everyday frame design with mid-bottom bracket, integrated seat clamp, and micro dropouts - SE tapered-leg forks with cut-out clearance for pegs - SE 3-piece tubular cranks with 25-9 micro gearing and SE sprocket - Alloy hubs - Lightweight seat/post combo - Top-load stem with hidden top cap for clean look - Extra-wide 2.3" tires provide more traction and forgiveness on harsh landings - 26.3 pounds