Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders

$1.99
Holds stainless steel stay rods to fender
Contains:
- (1) Eyelet bolt
- (1) 10mm lock nut
- (1) Rubber cap
Compatibility:
- All Hardcore, SpeedEZ, Cascadia, Cascadia ALX, & Grasshopper fenders

$3.99
- 8 rubber fender stay caps
- Compatible with all Hardcore, SpeedEZ, Cascadia, Cascadia ALX, and Grasshopper fenders

$4.00
Compatible with:
- Hardcore bike fenders - 700c x 45mm
- Full bike fenders - 700c x 45mm
- SpeedEZ bike fenders - 700c x 45mm
- Hardcore Recumbent bike fender - 700c rear
- Contains 45mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

$4.00
Compatible with:
- Full bike fenders - 26" x 60mm
- SpeedEz bike fenders - 26" x 60mm
- Hardcore bike fenders - 26" x 60mm
- Contains 60mm rear fender plastic clip, fork and brake bridge thru bolts, stay bolts and lock washers

$4.99
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders.
Includes:
- Rear fender plastic clip
- Fork and brake bridge-thru bolts
- Stay bolts and lock washers
Specific compatibility w/Planet Bike fenders:
- 35mm Width: 700c x 35mm Fenders (Hardcore)
- 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent)
- 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)

$5.00
- Contains 2 Mudflaps and Quick-Snap Attachments
- Compatible with: Road Hardcore fenders (sold separately)
- For use with 35mm width fenders (sold separately)

$5.00
- Contains 2 Mudflaps and Quick-Snap Attachments
- Compatible with all hybrid (45mm) fenders (part#s 7004, 7006, 7013, 7015) (sold separately)
- For use with 45mm width fenders (sold separately)

$6.95
Topeak's MTX DeFender is the perfect addition to your RX BeamRack. It clips seamlessly to the rack and provides valuable protection against moisture and trail grime.

$6.99
- Releases front fender stays if debris is present in between fender and tire
- Fits current and past Grasshopper, Cascadia ALX, Cascadia and Hardcore front fenders (not recommended for non-Planet Bike fenders)

$8.00
- Contains 2 Mudflaps and Quick-Snap attachments
- Compatible with: ATB Hardcore and SpeedEZ fenders (sold separately)
- For use with 60mm width fenders (sold separately)

$9.99
- Technopolymer construction
- Durable and weatherproof material
- Fits most front forks
- Zip ties included

$9.99
The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders.
Includes:
- Rear fender plastic clip
- Fork and brake bridge-thru bolts
- Stay bolts and lock washers
- Disc adaptor spacers (60mm & 65mm widths only)
Specific compatibility w/Planet Bike Fenders:
- 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore)
- 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full)
- 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore)
- 65mm Width: 29-inch x 65mm (Cascadia)

$9.99
The X-Long Spoiler is designed to add extra coverage to SKS fenders.
- Compatible with 45mm versions of the Chromoplastic, Commuter II, Long Board and Raceblade fender models
- Easily mounted by consumer with included hardware
- Sold as Each

$10.89 - $15.08
- Attaches to saddle rails
- Quick and easy to install and remove
- Fat Butt, a wider version for fatbike applications
- Road/CX narrower for road and cross bike applications

$10.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

$10.99
Addd an extra dose of stability to SKS's Velo 42 and Velo 47 fenders. A stainless steel U-stay mounts to the fenders and your frame eyelets to eliminate rattling and bouncing fenders.

$11.99
- Guards against mud
- Made from 100% recycled plastic waste
- 100% recyclable
- Supplied with 4 zip ties
- Made in England

$11.99
The S-Guard is not just for road bike cyclists; this super-lightweight (24g) and small mudguard protects your bottom from mud and water. Made with super-soft material, it fits on nearly every saddle with the addition of a cable tie.

$12.99
Planet Bike's Grunge Board is an easy-to-mount front fender that keeps you dry and clean when it's wet and muddy. It's made from a nearly indestructible polymer and it mounts in seconds to your down tube with the 2 rubber straps.

$12.99
The Mudrocker Rear Extender can be snapped on and used for extra protection in the bottom bracket/derailleur area. This item is included with the Mudrocker Rear Fender, but we offer it here as a replacement.
- Made in Germany

$13.00
Easy to install and available in various colors and designs, the Splash Pad Front Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and compatible with suspension forks.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.

$13.00
Easy to install and available in various colors and designs, the MSW Splash Pad Rear Fender won't let wet weather spoil your ride. It's designed for use with a range of bicycle styles and is compatible with standard saddle rail configurations.
- A low-profile, easy-install fender that keeps riders clean in various conditions
- Fits wide range of wheel sizes
- Tool-free installation
- Zip ties not included. Color zip tie options available through Problem Solvers.

$13.99
Lightweight and stealthy, Muc-Off Ride Guards keeps mud fling to a minimum.
- Guards against mud
- Made from 100% recycled plastic waste
- 100% recyclable
- Supplied with 4 zip ties
- Made in England

$13.99
- Lightest and most versatile MTB mudguard available
- Uses hook and loop Velcro straps to attach to the bridge and lower legs
- Compatible with forward and double bridge fork designs and all wheel sizes

$13.99
- Lightest and most versatile MTB mudguard available
- Uses hook and loop Velcro straps to attach to the bridge and lower legs
- Compatible with forward and double bridge fork designs and all wheel sizes
- Reverse version is designed for forks with reversed bridges

$13.99
- Suitable for all wheel sizes
- Keeps you clean and dry on wet roads and trails
- Newly improved designs in multiple options for better coverage
- Attaches quickly without tools
- Stores easily in a backpack or jersey pocket
- Application: Front
- Fender Size: 235mm x 155mm
- Material: Polypropylene
- Weight: 18g
- Wheel Size: Universal
Page 1 of 7
Next page