Details
The Dblocks Big Ripper has never looked so good! This bike is the signature ride of the king of the streets, Darnell Meyers, aka Dblocks. It’s spec’d with specific parts that Dblocks has chosen, such as the Famous-inspired snow camo frame & fork, Freedom ThickSlick tires, Power Wing cruiser bars, and New York Flyer seat. If you want to stand out in the crowd, this is the bike to ride.?
Key Features
- Retro 6061 aluminum Big Ripper frame with Floval tubing, looptail rear end, American bottom bracket, and classic PK Ripper wishbone plate
- Full Cr-Landing Gear forks
- Cr-Mo Power Wing cruiser bars
- Double-wall rims with sealed bearing high-flange hubs
- SE 3-piece V-Ridge cranks with alloy SE sprocket
- Authentic ODI Mushroom II grips with 45 Years of Radness SE donuts
- Freedom ThickSlick Comp 29” x 2.10” tires
- SE 45 Year Anniversary padset
- New York Flyer Seat with super grippy top cover and bottle opener
- SE Wheelie Pegs
- Custom Dblocks sticker sheet
- 30.5pounds
Size | 23.6-inch |
---|---|
TOP TUBE, ACTUAL (IN) | 23.6 |
SEAT TUBE, CENTER TO TOP (IN) | 16.9 |
SEAT TUBE ANGLE | 71° |
HEAD TUBE ANGLE | 71° |
CHAINSTAY LENGTH (IN) | 18.25 |
WHEELBASE (IN) | 44 |
BOTTOM BRACKET HEIGHT (IN) | 12.25 |
STANDOVER (IN) | 30.75 |
SUGGESTED RIDER SIZE | 5'5"+ (165cm+) |
STEM (mm) | 55 |
HANDLEBAR WIDTH (IN) | 29 |
CRANK (mm) | 175 |
WHEEL SIZE (IN) | 29 |
SEAT POST DIAMETER (mm) | 27.2 |
Specs
Frame | Dblocks Wheelie King Model, 6061 Aluminum Floval Tubing, Looptail Rear End, 68mm American Bottom Bracket, Wide Rear Stays, Retro Dropouts |
---|---|
Fork | Landing Gear, Full Cr-Mo |
Wheels | Sealed Bearing 36H High-Flange Alloy Flip Flop Hubs w/ Double-wall Rims, 16T Freewheel, Stainless Spokes |
Tires | Freedom ThickSlick Comp, 29" x 2.10" Front & Rear |
Crankset | SE V-Ridge 3-pc Cr-Mo Cranks, 175mm, Sealed American Bottom Bracket, 160mm Spindle Length, 19mm Spindle Diameter, 36T Alloy SE Racing Sprocket |
Chain | KMC S1 |
Brakes | Tektro 855AL V-Brake, Linear Cable |
Brake Levers | Tektro 316A, 2-Finger Alloy |
Handlebars | Cr-Mo Power Wing Cruiser Bar, 28" x 7", 10° Backsweep, 1° Upsweep |
Tape/Grips | Special Edition ODI Mushroom II Dual-Ply Grips, Made in USA, w/ 45 Years of Radness SE Donuts |
Stem | Retro Alloy Top-Load w/ Engraved SE Logo & Lightweight Cutouts, 55mm Reach |
Headset | Tange 1-1/8" Threadless |
Seatpost | Micro-Adjust Alloy, 27.2mm |
Saddle | Raise It Up Flyer Seat w/ Custom SE Bottle Opener Brace |
Pedals | Wellgo Low-profile Platform |
Accessories & Extras | 45 Years of SE Radness Padset, Custom Dblocks Sticker Sheet, Alloy Valve Caps, SE Wheelie Pegs |
* Subject to change without notice.