Many dropper posts feature remotes, that do not live up to a standard, that you would expect, when paying a lot of money for a dropper post. Even the most expensive droppers out there often come with remotes, that have ridiculous play, are made from plastic, bulky, heavy, or just do not function as they could. We put a lot of time and testing into the design of a remote lever that fulfils everything we want to see in a remote for dropper posts and since its introduction it has proven to be a favourite of many pro-riders and testers. - It is super leightweight (24g without clamp) - It is made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved - You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp - It has an unrivaled finish and touch - You have individual mounting points to adjust position - It has an integrated cable tensioner - Triggy can can clamp the cable by a set screw or it can hold the cable nipple and is compatible with any cable actuated dropper. Features: - Super leightweight (24g without clamp) - Made from 6061-T6 aluminium with a CNC finish, black anodized and laser engraved - You can (but don´t have to) bolt it directly to the most common brakes without an extra clamp - Exceptional finish and touch - Individual mounting points to adjust position - Integrated cable tensioner - 12.5 mm of maximum cable pull 1 set Triggy includes: Remote lever unit (black anodized and laser engraved aluminum body and lever with cable tension adjuster) Shift cable Shift cable endcap 1x "Splits" clamp or I-Spec adapter (optional)
It seems so small and insignificant, yet it's so important. The BB30 Wave Spring Washer is the keystone in your bottom bracket assembly, providing compression for proper setup and bearing preload, while helping to maintain adjustment after it's dialed in just right. They're also quite easy to lose or damage, so grab a few while you're at it.
A well-exercised dog is a happy dog, so give Fido a good workout while you ride! Sunlite's Dog Leash consists of a metal bar that mounts under the rear axle bolt or quick-release and straps to your chainstay. This keeps the center of gravity low so you stay stable if your dog pulls to one side. The bar is long enough to keep your pup away from the bike, too.
• Designed to keep dust and dirt out of V-Brake cable/housing systems
- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver
Interlok spacers nest into the lip of Cane Creek headset uppers for a rock solid, flex-free fit. - Composite construction
$1.00 - $35.99
- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|
Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.
$1.50 - $2.00
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool
- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack
Stainless steel pedal washers - Sold in pairs
Switching over to hydraulic brakes? Secure your cables with Origin-8's Hydraulic Pass-thru inserts. They will securely hold the hydraulic hose in place while you ride. • Fits bicycles with pass-thru braze-ons • Holds hydraulic hose securely in place • Bag of 10
- Aluminum w/lock nut - 18mm long/6mm O.D.
- Aluminum w/lock nut and mount - Slotted mount design
- Crown Race - Size: 27.0mm
- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame
Replacement bearing for the lower half of YST8003 #7 headset.
Replace the top bearing in your YST8300 headset with these caged ball bearings.
- Type: Lock washer - Size: 1" Keyed
$1.99 - $3.99
- Oversize 10mm - Fits new style MTB & BMX levers - Aluminum construction
- Routes cables underneath the bottom bracket - Will not rust or corrode
- w/Nut - 1-3/4-inch
- 8x1mm Allen head
This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever
- Replacement retaining clip for the Surly Tuggnut/Snuggnut
Replacement M5 x 10 Socket Head Screw fastener for derailleur hangers. - Head Type: Socket Head Cap - Drive Type: Hex Socket - Thread Size: M5x0.8mm - Length Under Head: 10mm - Material: Stainless Steel - Hex Key Size: 4mm - Bag of 5
- Rubber - Color: Black
Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC
The Gyro G3 upper top plate is designed for use with the G3 detangler.
$2.65 - $3.50
Replacement M5 x 8 Flat Head Screw fastener for derailleur hangers. - Thread: M5-0.8 - Overall Length: 8mm - Material: Steel - Use with 3mm hex wrench - Bag of 5
Page 1 of 39 Next page